This paper proposed a design of optical switching controller using FPGA for OCDMA encoder system. The encoder is one of the new technologies that use to transmit the coded data in the optical communication system by using FPGA and optical switches. It is providing a high security for data transmission due to all data will be transmitting in binary code form. The output signals from FPGA are coded with a binary code that given to an optical switch before it signal modulate with the carrier and transmit to the receiver. In this paper, AA and 55 data were used for source 1 and source 2. It is generated sample data and sent packet data to the FPGA and stored it into RAM. The simulation results have done by using software Verilog Spartan 2 programming to simulate. After that the output will produces at waveform to display the output. The main function of FPGA controlling unit is producing single pulse and configuring optical switching system.

[1] Harold P.E. Stern, Samy A. Mahmoud, “Theory of Code Division Multiplexing, Communication Systems: Analysis and Design”, Prentice Hall PTR.
[2] Y. Wang, et al., "Design and experiment of an all-optical label using FBG-based encoder/decoders," 2009, pp. 727811-1.
[3] M. S. Ab-Rahman, et al., "Development of Low-cost OCDMA Encoder based on Arrayed Waveguide Gratings (AWGs) and Optical Switches," World Academy of Science, Engineering and Technology, vol. 46, 2008.
[4] Shah, “Code Division Multiple Access : A Tutorial”, p6-10,Wireless Communication, Rowan University,1999.
[5] C. Zhang, et al., "Experimental demonstration of tunable multiple optical orthogonal codes sequences-based optical label for optical packets switching," Optics Communications, vol. 283, pp. 932-938, 2010.
[6] B. Zeidman and Z. Consulting, Introduction to verilog: IEEE Press, 2000.
[7] K. Skahill, “VHDL for Programmable Logic”, Addison-Wesley,1999.
[8] A. Dhital, "CDMA System: Simulation and Implementation," 2006.
[9] S. Prakash, et al., "Compact field programmable gate array (FPGA) controller for aircraft/aerospace structures," 2008.
[10] M. Akiyama, et al., "High-performance pulsed-power generator controlled by FPGA," Plasma Science, IEEE Transactions on, vol. 38, pp. 2588-2592, 2010.
[11] M. Zainudin, H. Radi, and S. Abdullah, “Face Recognition using Principle Component Analysis (PCA) and Linear Discriminant Analysis (LDA),” ijens.org, no. 05, 2012.
[12] A. Jaafar, N. Arasid, N. Hashim, A. Latiff, and H. Rafis, “Three Bit Subtraction Circuit via Field Programmable Gate Array,” ijaret.org, vol. 1, no. Viii, pp. 1–13, 2013.
[13] Jaafar, A., Hamidon A.H., A.A. Latiff, Hazli Rafis, H.H.M. Yusof, W.H.M. Saad, “Modelling of swarm communication,” Int. J. Adv. Res. Electr. Electron. Instrum. Eng., vol. 2, no. 8, pp. 3725–3731, 2013
[14] Latiff, A. A., et al. "Comparative Study on Single-And Double-Pass Configurations for Serial Dual-Stage High Concentration EDFA.", Int. J. of Research in Eng. and Tech., vol. 2, no.12,pp. 139-143,2013.

@article{jaafar03021001,
title = " OPTICAL SWITCHING CONTROLLER USING FPGA AS A CONTROLLER FOR OCDMA ENCODER SYSTEM ",
journal = "International Journal of Science and Engineering Applications (IJSEA)",
volume = "3",
number = "2",
pages = "06 - 09",
year = "2014",
author = " Jaafar, A., Saffie, N.B., M.H. Sulaiman ",
}