Three phase squirrel cage induction motors consume 60% of industrial electricity. 1% increase in efficiency of all the motors in India will save 500 MW powers which needs the initial generation cost of 2000 crores. The efficiency of an induction motor can be substantially improved by controlling the voltage to frequency ratio (V/Hz). Another method of improving the efficiency of induction motor was coating enameled copper wire filled with Al2O3 nano filler. One such method used in this project was carried out under serious literature survey. Based on the previous project works, actions were taken to use the enamel filled with nano filler as the coating for the induction motor to improve its efficiency. Definitely, there will be a tremendous improvement in the efficiency of the induction motor and hence the motor can be called as “High Efficiency Squirrel Cage Induction Motor”.

[1] Selvaraj, D. Edison, et al. "Analysis of Efficiency, Thermal Withstanding Capacity and Electromagnetic Interference of Three Phase Squirrel Cage Induction Motor Coated with SiO2 & TiO2 nano composite Filled Enamel." International Journalof Science and Engineering Applications 1.1 (2012): 17-21.
[2] Edison Selvaraj, D., C. Pugazhendhi Sugumaran, and A. Sivaprakash."Characterization Of Electrical and Thermal Properties of Enamel Filled with Carbon Nanotubes." Proceedings of the Third International Conference on Trends in Information, Telecommunication and Computing. Springer New York, 2013.
[3] Selvaraj, D. Edison. "Partial discharge characteristics of enamel filled with micro and nano composite of siO2 and TiO2." International Journal of Science and Engineering Applications 1.2 (2012): 95-101.
[4] Selvaraj, D. Edison. "Characterization of dielectric properties of the enamel filled with carbon nano tubes for the frequency range of 50 Hz-5 MHz" International Journal of Science and Engineering Applications 1.2 (2012): 102- 106.
[5] Selvaraj, D. Edison, and C. Pugazhendhi Sugumaran. "Comparative Analysis of Dielectric Properties of Enamel Filled with Various Nano fillers such as ZrO2, Al2O3, CNT and ZnO." International Journal of Science and Engineering Applications 1.1 (2012): 51-55.
[6] Babu, B. Gurukarthik, D. Edison Selvaraj, R. Srinivas, B. Guru Prakash, and R. Vishnu. "Analysis of Relative Permittivity and Tan Delta Characteristics of Silicone Rubber Based Nano- composites." International Journal of Scientific Engineering and Technology, pp.2201- 206, 2012.
[7] D.EdisonSelvaraj,J.Ganesan. "Experimental Analysis of Efficiency and Thermal Withstanding Capacity of Three Phase Squirrel Cage Induction Motor Coated with SiO2 & TiO2 Nano Composite Filled Enamel", International Journal of Engineering Sciences, Vol (2), No (4), 2013. pp. 115-118.
[8] Lieutenant Ganesan. J, Jeyadevi.S.Dr, and Edison Selvaraj. D, “Performance Analysis of Single Phase Induction Motor Coated with Al2O3 Nano Filler Mixed Enamel” ACEEE International Journal on Recent Trends in Engineering & Technology Vol. 10, No. 1, Jan 2014.
[9] Edison Selvaraj. D, Pugazhendhi Sugumaran. C, Lieutenant Ganesan. J, Ramathilagam. J, “Analysis of Dielectric and Thermal Properties of Polyamide Enamel Filled with Carbon Nano tubes” International Journal of Nano science, Vol.12, Issue 3, June 2013.
[10] Lieutenant Ganesan. J, Edison Selvaraj. D, and Ramathilagam. J,“Experimental analysis of Thermal conductivity of enamel filled with micro and nano composite of SiO2 and TiO2” International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue 7,pp. 2907-2912 , 2013.
[11] Lieutenant Ganesan. J, Jeyadevi. S. Dr, and Edison Selvaraj. D, “Reduction of Electromagnetic Interference in Single Phase Induction Motor by coating the winding with Al2O3 nano filler mixed Enamel” International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue7,pp. 2913-2916 , 2013.
[12] Lieutenant Ganesan. J, Edison Selvaraj. D, and Selva Kumar. B, “High Efficiency Induction Motor”, International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue 2, pp. 750-754, 2013.
[13] Lieutenant Ganesan. J, and Edison Selvaraj. D, “Analysis of Thermal and Electrical Properties of Enamel Filled with Various Nano fillers such as ZrO2, Al2O3 and CNT”, International Journal of Engineering Research, Vol.2, Issue 2, pp. 182-186, 2013.

@article{edison03021003,
title = " Energy Efficient Three Phase Squirrel Cage Induction Motor fed AC Drives ",
journal = "International Journal of Science and Engineering Applications (IJSEA)",
volume = "3",
number = "2",
pages = "18 - 21",
year = "2014",
author = " D. Edison Selvaraj, C. Ruban Karthik, R. Arun, S. Geethadevi, J.Ganesan ",
}