IJSEA Archive (Volume 3, Issue 5)
International Journal of Science and Engineering Applications (IJSEA) (Volume 3, Issue 5 Sept-Oct 2014)
A Literature Review on Synthesis and Characterization of enamelled copper wire filled with CNT
D. Edison Selvaraj,G. Dhivya,C. Pugazhendhi Sugumaran,Nangbes J. Gungsat,J. Ganesan,S. Geethadevi,S. Dinesh Kumar
Keywords: Enamel, Nano fillers, CNT, Al2O3, TiO2
This paper discusses about the survey on the various magazines, conference papers and journals for understanding the properties of enamelled copper wires mixed with nano fillers, fundamental methods for synthesis and characterization of carbon nanotubes. From all these papers, it was noted that the research work carried out in an enamelled copper wires filled with nano fillers has shown better results. It was also recorded that the research work was carried mostly with single metal catalysts and very little amount of research work has been carried out on the synthesis of carbon nanotubes using bimetallic catalysts.
 P.C.Irwin, Y.Cao, A.Bansal and L.S.Schadler , “Thermal and mechanical properties of polyimide nanocomposites”, IEEE 2003.
 J.Keith Nelson, John C.Fothergill,L.A.Dissado and W.Peasgood, “Towards an understanding of nanometric dielectrics”, IEEE 2002.
 Naoki Hayakawa and Hitoshi Okubo, “lifetime characteristics of nanocomposite enameled wire under surge voltage application”, IEEE 2008.
 K.Inuzuka, H.Inano, N.Hayakawa, T.Hirose, M.Hamaguchi and H.Okubo , “Partial discharge characteristics of nanocomposite enameled wire for inverter fed motor”, IEEEE 2006.
 Santanu Singha and M.Joy Thomas, “Permittivity and tan delta characteristics of epoxy nanocomposites in the frequency range of 1 mhz – 1 ghz”, IEEE 2008.
 Toshikatsu Tanaka, Masahiro Kozako, Norikazu Fuse and Yoshimichi ohki, “Proposal of a multi-cored model for polymer nanocomposite dielectrics”, IEEE 2005.
 Hulya Kirkici, Mert Serkan and K.Koppisetty , “Nano- dielectric materials in electrical insulation application”, IEEE 2005.
 M.Q.Nguyen ,D.Malec ,D.Mary ,P.Werynswki ,B.Gornicka, L.Therese and Ph.Guillot, “Investigations on dielectric properties of enameled wires with nanofilled varnish for rotating machines fed by inverters”, IEEE 2009.
 J. Keith Nelson and John C Fothergill, “Internal charge behaviour of nanocomposites”, Institute of Physics Publishing, 2004.
 W. Pfeiffer and M. Paede, “About the influence of the environmental conditions on the partial discharge characteristics of enameled wire at high frequency voltage”.
 IEC 60851, Methods of test for winding wires, 1994.
 IEC 61251: Electrical insulating materials – A.C. voltage endurance evaluation. IEC, Geneva, 1993.
 Andrews R., D.Jacques, E.C.Dickey and D.Qian,(2003) “Synthesis and growth mechanism of multiwalled carbon nanotubes”, Center for Applied Energy Research, University of Kentucky.
 Biro L.P., Z.E.Horvath, A.A.Koos, Z.Osvath, Z.Vertesy and L.Tapazto, (2003) “Direct synthesis of multi-walled and single walled carbon nanotubes by spray- pyrolysis”, Journal of Optoelectronics and advanced materials, Vol.5, issue 3, pp 661- 666.
 Carole E. Baddour and Cedric Briens (2005) “Carbon Nanotube Synthesis: A Review”, International Journal of Chemical Reactor Engineering, Vol 3, Review R3
 Couteau E., J.W. Seo , L Thien-Nga , Cs. Mik , R.Gaal , L.Forro, (2003) “CVD synthesis of high-purity multiwalled carbon nanotubes using CaCO3 catalyst support for large-scale production” Chemical Physics Letters 378, pp 9–17.
 Engel-Herbert R. a, H. Pforte b, T. Hesjedal, (2007) “CVD synthesis and purification of single-walled carbon nanotubes using silica-supported metal catalyst” Materials Letters 61, pp 2589–2593.
 Giuseppe Gulino, Ricardo Vieira, Julien Amadou, Patrick Nguyen, Marc J. Ledoux, Signorino Galvagno, Gabriele Centi, Cuong Pham- Huu,(2005) “C2H6 as an active carbon source for a large scale synthesis of carbon nanotubes by chemical vapour deposition” Applied Catalysis A:General 279, pp 89–97.
 Guo. P.S. Z. Sun, Y.W. Chen, Z.H. Zheng (2006) “A novel approach to mass synthesis of raw CNTs for printed field emission cathodes by chemical vapour deposition” Materials Letter, Vol.60, pp 966-969.
 Hiroshi Kinoshita ., Ippei Ippei, Hirokazu Sakai, Nobuo Ohmae,(2007) “Synthesis and mechanical properties of carbon nanotube/diamond-like carbon composite films”, Diamond & Related Materials 16, pp 1940–1944.
 Jipeng Cheng, Xiaobin Zhang , Zhiqiang Luo, Fu Liu, Ying Ye , Wanzhong Yin , Wei Liu , Yuexin Han, (2006) “Carbon nanotube synthesis and parametric study using CaCO3 nanocrystals as catalyst support by CVD” Materials Chemistry and Physics 95, pp 5–11
 Jing Kong, Alan M.Cassell, Hongjie Dai,(1998) “Chemical Vapour Deposition of methane for single walled carbon nanotubes”, Chemical Physics Letters 292,pp 567 – 574.
 Liu B.C., B. Yu, M.X. Zhang , (2005)“Catalytic CVD synthesis of double-walled carbon nanotubes with a narrow distribution of diameters over Fe–Co/MgO catalyst” Chemical Physics Letters 407, pp 232–235.
 Li T.X., H.G. Zhang , F.J. Wang, Z. Chen , K. Saito, (2007) “Synthesis of carbon nanotubes on Ni-alloy and Si-substrates using counter flow methane air diffusion flames”, Proceedings of the Combustion Institute 31, pp 1849–1856
 Li Y.,.Zhang X.B,.Tao X.Y, J.M.Xu, F.Liu and H.J.Geise, (2005) “Single phase MgMoO4 as catalyst for the synthesis of bundled multi-wall carbon nanotubes by CVD”, Journal of Carbon, 43, pp 1325 – 1328.
 Mariano Escobar, M. Sergio Moreno, Roberto J. Candal, M. Claudia Marchi, Alvaro Caso, Pablo I. Polosecki, Gerardo H. Rubiolo, Silvia Goyanes,(2007) “Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics” Applied Surface Science 254, pp 251 -256
 Matthieu Paillet, Jannik C.Meyer, Thiery Michel, Bruno Chaudret and Ahmed Zahab, (2006) “Selective growth of large chiral angle single walled carbon nanotubes”, Diamond & Related Materials, 15, pp 1019 – 1022
 Resasco. D.E., Alvarez W.E., F.Pompeo, L.Balzano and A.Borgna, (2002) “A scalable process for production of single-walled carbon nanotubes by catalytic disproportionation of CO on a solid catalyst”, Journal of Nanoparticle Research, Vol 4, pp 131 – 136.
 Segura R., M.Flores, S.Hevia, P.Haberle, (2007) “Synthesis, characterization and spectroscopy of carbon based nanoscale materials”, Microelectronics Journal Article in press.
 Sing B.K, Sung-Wook Cho, K.S.Bartwal, Nguyen Duc Hoa,Hojin Ryu(2007) “Synthesis of MWNTs using Fe– Mo bimetallic catalyst by CVD method for field emission application”, Solid State Communications 144, pp 498–502.
 Tao X.Y. a,b, X.B. Zhang a,b,., F.Y. Sun c, J.P. Cheng a,b, F. Liu a, Z.Q. Luo,(2007) “Large-scale CVD synthesis of nitrogen-doped multi-walled carbon nanotubes with controllable nitrogen content on a CoxMg1-xMoO4 catalyst”, Diamond & Related Materials 16, pp 425–430
 Yu G.J., Gong J.L, S.X. He, J.Q. Cao, Z.Y. Zhu, (2006) “Efficient synthesis of carbon nanotubes over rare earth zeolites by thermal chemical vapor deposition at low temperature” Diamond & Related Materials 15, pp 1261 – 1265
 M S Naidu and V Kamaraju, “High Voltage Engineering” Solid dielectrics used in practice pp 106 – 122.
 Dieter Kind and Hermann Kamer, “High Voltage Insulation Technology” 1985.
 E. Kuffel, W.S. Zaengl and J. Kuffel, “High Voltage Engineering Fundamentals” Partial discharge measurements pp 421 – 456.
 Partial discharge measurements, IEC 270, 1981.
 IEC standard 60270: 1999 Partial discharge measurements.
 B. Tareev “Physics of Dielectric Materials” Tests for thermal ageing pp 234 – 235.
 M. Arumugam “Material Science” Scanning Electron Microscope pp 423.
title = " A Literature Review on Synthesis and Characterization of enamelled copper wire filled with CNT ",
journal = "International Journal of Science and Engineering Applications (IJSEA)",
volume = "3",
number = "5",
pages = "122 - 126",
year = "2014",
author = " D. Edison Selvaraj,G. Dhivya,C. Pugazhendhi Sugumaran,Nangbes J. Gungsat,J. Ganesan,S. Geethadevi,S. Dinesh Kumar ",