Authors can submit their research articles to editor@ijsea.com  

Processing Charges

IJSEA is index with

 

 

 

 

 

 

 

IJSEA Archive (Volume 3, Issue 5)

International Journal of Science and Engineering Applications (IJSEA)  (Volume 3, Issue 5 Sept-Oct 2014)

Short Notes for Understanding the Basics of Nano Technology

D. Edison Selvaraj,C. Pugazhendhi Sugumaran,D. Krishnamoorthi,M. Rajmal Joshi ,J.Ganesan,S. Geethadevi,S. Dinesh Kumar

10.7753/IJSEA0305.1003




 PDF 



Keywords: Nano Technology, Advantages, Disadvantages, Applications, Quantum dots, Nano particles, Nano wires

Abstract References BibText


        In this paper, the basic terms and definitions of nano technology was discussed. The characteristics, advantages and disadvantages of nano technology were discussed. Applications of nano technology were also mentioned. This paper would be useful to young engineers to study the fundamentals of nano particles. Two approaches used for nano technology were also elaborated.


[1] Selvaraj, D. Edison, et al. "Analysis of Efficiency, Thermal Withstanding Capacity and Electromagnetic Interference of Three Phase Squirrel Cage Induction Motor Coated with SiO2 & TiO2 nano composite Filled Enamel." International Journal of Science and Engineering Applications 1.1 (2012): 17- 21.
[2] Edison Selvaraj, D., C. Pugazhendhi Sugumaran, and A. Sivaprakash."Characterization of Electrical and Thermal Properties of Enamel Filled with Carbon Nanotubes." Proceedings of the Third International Conference on Trends in Information, Telecommunication and Computing. Springer New York, 2013.
[3] Selvaraj, D. Edison. "Partial discharge characteristics of enamel filled with micro and nano composite of siO2 and TiO2." International Journal of Science and Engineering Applications 1.2 (2012): 95-101.
[4] Selvaraj, D. Edison. "Characterization of dielectric properties of the enamel filled with carbon nano tubes for the frequency range of 50 Hz-5 MHz" International Journal of Science and Engineering Applications 1.2 (2012): 102-106.
[5] Selvaraj, D. Edison, and C. Pugazhendhi Sugumaran. "Comparative Analysis of Dielectric Properties of Enamel Filled with Various Nanofillers such as ZrO2, Al2O3, CNT and ZnO." International Journal of Science and Engineering Applications 1.1 (2012): 51-55.
[6] Babu, B. Gurukarthik, D. Edison Selvaraj, R. Srinivas, B. Guru Prakash, and R. Vishnu. "Analysis of Relative Permittivity and Tan Delta Characteristics of Silicone Rubber Based Nano-composites." International Journal of Scientific Engineering and Technology , pp.2201-206, 2012.
[7] D. Edison Selvaraj, J. Ganesan. "Experimental Analysis of Efficiency and Thermal Withstanding Capacity of Three Phase Squirrel Cage Induction Motor Coated with SiO2 & TiO2 Nano Composite Filled Enamel", International Journal of Engineering Sciences, Vol (2), No (4), 2013. pp. 115-118.
[8] Lieutenant Ganesan. J, Jeyadevi.S.Dr, and Edison Selvaraj. D, “Performance Analysis of Single Phase Induction Motor Coated with Al2O3 Nano Filler Mixed Enamel” ACEEE International Journal on Recent Trends in Engineering & Technology Vol. 10, No. 1, Jan 2014.
[9] Edison Selvaraj. D, Pugazhendhi Sugumaran. C, Lieutenant Ganesan. J, Ramathilagam. J, “Analysis of Dielectric and Thermal Properties of Polyamide Enamel Filled with Carbon Nano tubes” International Journal of Nano science, Vol.12, Issue 3, June 2013.
[10] Lieutenant Ganesan. J, Edison Selvaraj. D, and Ramathilagam. J,“Experimental analysis of Thermal conductivity of enamel filled with micro and nano composite of SiO2 and TiO2” International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue 7,pp. 2907-2912 , 2013.
[11] Lieutenant Ganesan. J, Jeyadevi. S. Dr, and Edison Selvaraj. D, “Reduction of Electromagnetic Interference in Single Phase Induction Motor by coating the winding with Al2O3 nano filler mixed Enamel” International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue7,pp. 2913-2916 , 2013.
[12] Lieutenant Ganesan. J, Edison Selvaraj. D, and Selva Kumar. B, “High Efficiency Induction Motor”, International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2, Issue 2, pp. 750-754, 2013.
[13] Lieutenant Ganesan. J, Edison Selvaraj. D, GuruPrakash. B, Vishnu Prakash. R, Muthupandi. E, and BalaKumar. R, “Analysis of Efficiency and Thermal Withstanding Capacity of Single Phase Induction Motor Coated with Al2O3 Nano Filler Mixed Enamel”, International journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol.2,Issue 3,pp. 960-963, 2013


@article{Edison03051003,
title = " Short Notes for Understanding the Basics of Nano Technology ",
journal = "International Journal of Science and Engineering Applications (IJSEA)",
volume = "3",
number = "5",
pages = "130 - 136",
year = "2014",
author = " D. Edison Selvaraj,C. Pugazhendhi Sugumaran,D. Krishnamoorthi,M. Rajmal Joshi ,J.Ganesan,S. Geethadevi,S. Dinesh Kumar ",
}