Laser Cutting of weldox-700 materials is popular processes in manufacturing industries This research paper for primary study for evaluate the effect of the processing parameters (Laser Power, gas pressure, pulse frequency and Cutting speed) under the quality of the cut for weldox-700 materials. Then the experiment was done by 6mm thick weldox-700 material plates. In this experiment focused on establish relation of different parameters on Cutting quality, which is decided by the Surface Roughness and Kerf Width.

http://en.wikipedia.org/wiki/Laser
George Chryssolouris, "Laser Machining", New, Springer-Verlag, 1991;
www.weldox.com
http://support.minitab.com/en-us/minitab/17/topic-library/modeling-statistics/doe/taguchi-designs/taguchi-designs/
https://www.atecorp.com/ATECorp/media/pdfs/data-sheets/Mitutoyo-SJ-201P_Datasheet.pdf
http://compdent.uthscsa.edu/dig/itdesc.html
Gould, R. Gordon (1959). "The LASER, Light Amplification by Stimulated Emission of Radiation". In Franken, P.A. and Sands, R.H. (Eds.). The Ann Arbor Conference on Optical Pumping, the University of Michigan, 15 June through 18 June 1959. p. 128.OCLC 02460155.
Chu, Steven; Townes, Charles (2003). "Arthur Schawlow". In Edward P. Lazar (ed.),.Biographical Memoirs. vol. 83. National Academy of Sciences. p. 202. ISBN 0-309-08699-X
Nolen,jim;Derek verno.”The carbon Dioxide Laser”. Davidson Physics. Retried17 Aug 2014
https://www.idc online.com/technical_references/pdfs/mechanical_engineering/Parametric%20investigation
Achievements in Materials and manufacturing Engineering 54/1 (2012) 128-134
Jia Deli, You Bo (2010) - "An intelligent control strategy for plasma arc Cutting technology" Harbin University of Science and Technology, Harbin 150080, China
Jiayou Wang &Zhengyu Zhu &Conghui He &Feng Yang (2010) - "Effect of dual swirling plasma arc Cutting parameters on kerf characteristics" Int J Mater Form (2011) 4:39–43
http://www.revtn.ro/pdf4-Radovanovic
https://www.idc online.com/technical_references/pdfs/mechanical_engineering/Parametric%20investigation.pdf
http://www.tribology.fink.rs/journals/2012/2012-4/7.pdf
http://www.ijsea.com/archive/volume2/issue6/IJSEA02061003.html
http://www.ijetae.com/files/Volume3Issue4/IJETAE_0413_35.pdf
K.A. Ghany, M. Newishy, Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CW Nd YAG Laser, Journal of Material Processing Technology 168 (2005) 438–447
S.-L. Chen, The effects of high-pressure assistant-gas flow on high Power CO2 Laser Cutting, Journal of Material Processing Technology 88 (1999) 57–66
N. Raja ram, J.S. Ahmad, S.H. Cheraghi, ―CO2 Laser cut quality of 4130 steel‖, International Journal of Machine Tools and Manufacture 43 (2003) 351–358.
F. Caiazzo, F. Curcioa, G. Daurelio, F. Memola Capece Minutolo, ―Laser Cutting of different polymeric plastics
M. Zaied, E. Bayraktar, D. Katundi, M. Boujelbene, I. Miraoui, ―Effect of Laser Cutting parameters on surface quality of low carbon steel (S235)‖, Journal of
N. Rajendran, M.B. Pate, The effect of Laser beam velocity on cut quality and surface temperature, American Society of Mechanical Engineers, Heat Transfer Division 104 (1988) 121–127
Schuocker, D. (1998). Handbook of the Euro Laser Academy.
S. Crouch and Thomas Savery, The Miner's Friend: Or an Engine to Raise Water by Fire, 1827, Page 12-16 Phillip J. Ross, Taguchi Techniques For Quality Engineering, Tata McGraw Hill, 2nd Edition,2012 Page 91-179
Avanish Kumar Dubey, and Vinod Yadava. Optimization of kerf quality during pulsed Laser Cutting of aluminium alloy sheet. Journal of materials processing technology, pages 412–418, 2008.
A.Riveiro et al. The Role of the Assist Gas Nature in Laser Cutting of Aluminum Alloys. Physics Procedia, pages 548–554, 2011.
Arindam Ghosal, and Alakesh Manna. Response surface method based optimization of ytterbium fiber Laser parameter during machining of Al/AL2O3-MMC. Opticsand Laser Technology, pages 67–76, 2013.
http://www.annualreviews.org/doi/abs/10.1146/annurev.pc.34.100183.003013
http://www.rp-photonics.com/solid_state_Lasers.html
http://www.rp-photonics.com/fiber_Lasers.html
http://www.rp-photonics.com/semiconductor_Lasers.html
http://www.colby.edu/chemistry/PChem/lab/DyeLaser.pdf
http://www.rp-photonics.com/free_electron_Lasers.html
http://www2.isye.gatech.edu/~roshan/publications/Taguchi.pdf
http://www2.kuas.edu.tw/prof/shihtao/qms/Powerpoint/foster%20text/Ch07S-new.ppt

@article{Vadhel04031001,
title = " Parametric Analysis of CO2 Laser for Quality of Weldox- 700 Material ",
journal = "International Journal of Science and Engineering Applications (IJSEA)",
volume = "4",
number = "3",
pages = "79 - 85",
year = "2015",
author = " Vadhel Ajay Jethabhai,Jignesh Patel ",
}