IJSEA Volume 7 Issue 9

Design of Distillation Column for Liquid Fuel from Waste Tire

Dr. Zarni Htay , Moe Moe Kyaw , Tint Tint Kywe
10.7753/IJSEA0709.1005
keywords : waste tire, catalyst pellets, liquid fuel, XRD, gravimetric analysis method

PDF
In this study, tire chips (without steel cords) obtained from waste tire were used as raw material to prepare valuable products; liquid fuel, char and gas. Two-stage reaction system was used in this experiment. Three types of catalyst pellets (volcanic ash, dolomite and Mabisan clay) were prepared by activation in furnace about 3 hours and temperature range from 800?C to 850?C.These catalyst were analyzed by using X-ray Diffraction (XRD) and gravimetric analysis method. There were four experiments in this study. The final product, liquid fuel was measured its density, viscosity, kinematic viscosity and refractive index. The experiments were carried out at temperatures between 210 - 400 ?C with and without using any catalyst. Yield percent of liquid fuels were 50.12%, 51.34%, 48.54% and 44.65% for using Mabisan clay, volcanic ash, dolomite and without catalyst respectively.Moreover,yield percent of char and gas fuel of the experiment was obtained 40% and 10 % respectively.
@artical{d792018ijsea07091005,
Title = "Design of Distillation Column for Liquid Fuel from Waste Tire",
Journal ="International Journal of Science and Engineering Applications (IJSEA)",
Volume = "7",
Issue ="9",
Pages ="280 - 283",
Year = "2018",
Authors ="Dr. Zarni Htay , Moe Moe Kyaw , Tint Tint Kywe"}